Roto rasp Ø125 Standard 2.0mm



23.61 $

ROTO RASP - Rotation grinding disc for angle grinders. It is used for processing wood, plastics, rubber, artifitial coal tar pitch, styrofoam and other soft materials. 

Instruction manual

Qty

 

Security policy

 

Delivery policy

 

Return policy

Roto Rasp Ø125xØ22,2mm, Teeth 2.0mm Medium.

This innovative Croatian product for cutting soft materials by removing particles is used with hand rotation angle grinders. The disc used with an angle grinder enables you to cut soft materials such as wood, plastics, rubber etc. in a simple way by removing particles. Its construction makes it possible to remove a larger volume, compared to other rotation discs or sandpaper.

Its simple installation and use do not require special skills or knowledge. 

The well-known blades used with angle grinders, such as grinding discs and sandpaper, have certain disadvantages. When cutting soft materials such as wood or plastics with a grinding disc or sandpaper, the removed particles fill the space between the cutting grains, which affects the efficiency of work, increases the friction between the tool and the material, as well as the temperature of the surface you are working on.

The filled grinding disc leads to the burned surface and prevents you from further work. The soft material does not allow for the self-sharpening of the blade. A similar problem will appear when using the sandpaper as, except for the above mentioned, it will quickly wear out. Compared to the known blades for angle grinders, the rotation disc makes the cutting of soft materials more efficient with respect to the amount of removed particles in a time unit.

ROTO RASP can be easily installed by tightening it on its shaft with the original tightening plate and nut. The kinematics necessary for cutting is achieved by changing the rotation on the grinder between 1.500 and 11.000 rpm. ROTO RASP is made of steel tin, it is 0.7 mm thick and has been thermo-chemically processed. The blades on the working surface of the disc remove the particles and cut. A hole for letting out the removed particles is placed below each line of blades, which prevents the filling of the disc's working area and enables a continuous cutting.

ROTO RASP is made in 2 diameters- 115mm and 125mmNEW. Each size is in 3 different roughness (size of cutting teeth): Fine - 1.5mm, Medium - 2.0mm and Coarse - 2.5mm.

Please read Instructions manual before using ROTO RASP!

R125x2,0

Specific References

our brands